Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
Dimensions (W x H x D): | 24.6 mm x 80 mm x 53.5 mm |
Housing design (light emission): | Rectangular |
Sensing range max.: | 100 mm … 800 mm 1) |
Sensing range: | 100 mm … 800 mm |
Type of light: | Visible red light |
Light source: | Laser 2) |
Laser class: | 2 (IEC 825), low power. Eyes normally protected by averting reaction and eyelid closing reflex |
Light spot diameter (distance): | Ø 2 mm (400 mm) |
Adjustment of operating distance: | Potentiometer |
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 50,000 h at TA = +25 °C | |
Mechanics/electronics | |
Supply voltage: | 10 V DC … 30 V DC 1) |
Ripple: | ≤ 5 % 2) |
Power consumption: | ≤ 35 mA 3) |
Switching output: | PNP |
Output function: | Complementary |
Switching mode: | Light/dark-switching |
Output current Imax.: | 100 mA |
Response time: | < 500 µs 4) |
Switching frequency: | 1,000 Hz 5) |
Connection type: | Connector M12, 4-pin |
Circuit protection: | A, C, D 6) 7) 8) |
Protection class: | II 9) |
Weight: | 100 g |
Special device: | |
Housing material: | ABS |
Enclosure rating: | IP 67 |
Ambient operating temperature: | -10 °C … 45 °C |
Ambient storage temperature: | -10 °C … 75 °C |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected 9) Reference voltage 50 V DC |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.