Technical Datasheet: TURCK BI2-Q5,5-AP6X-0,12-RS4/S34

Product Type: Rectangular Inductive Proximity Sensor (Block Style)

Ident-No.: 1613083

Special Variant: /S34 (Weld-field immune or specific cable/temperature modifier)

1. Product Characteristics & Application

• Sensor Type: Inductive Proximity Sensor

• Housing Design: Rectangular fine block/pancake profile (Q5,5 ultra-flat series).

• Sensing Range ($S_n$): 2 mm

• Mounting: Flush mountable (indicated by the flush mounting symbol layout on the label face).

• Special Features: The Q5,5 block series is designed for ultra-low profile mounting where a standard cylindrical barrel sensor cannot fit. It features a robust active plastic detection face and is ideal for highly compact automated machinery, pneumatic cylinder piston slide monitoring, and robotic end-effectors.

2. Electrical Data

• Operating Voltage: 10…30 V DC

• Rated Current Consumption: ≤ 150 mA

• Electrical Design: DC PNP

• Output Function: Normally Open (NO)

• Protection Class: Class 2 Source compliant (UL listed, 36GN) / Enclosure Type 1

3. Performance & Dynamic Data

• Switching Frequency: High response cyclic rate optimized for high-speed target counting and low-clearance position validation.

• Short-Circuit Protection (SCP): Yes

• Overload & Reverse Polarity Protection: Yes

4. Mechanical & Environmental Data

• Dimensions: 5.5 mm low-profile thickness housing block design

• Housing Material: Rugged industrial plastic (PP-GF30 or plastic PA12-GF30)

• Ambient Operating Temperature: -25 °C…70 °C

• Ingress Protection (IP Rating): IP67

• Country of Origin: Made in Switzerland

• Cable Integrity: Features an integrated short pigtail cable (0.12 meters / 12 cm) terminating in a professional circular quick-connector plug assembly (RS4 layout thread).

• Item Code / Batch: 1318I

5. Electrical Connection & Wiring Layout

The sensor connection features an integrated short hard-wired lead ending in a circular connector plug (typically a standard 4-pin/3-pin M12 or M8 configuration mapped to active contact pins).

Pinout Assignment:

• Pin 1: Brown wire (BN) → + (10…30 V DC Power Supply)

• Pin 3: Blue wire (BU) → – (0 V Ground / Common)

• Pin 4: Black wire (BK) → Output Switching Signal (Load)

Wiring Diagram:

       [ Pin 1 ] ───────────────────────── ( + )
          │
      ┌───┴───┐
      │  PNP  │───────── [ Pin 4 ] ──── [ Load ] ────┐
      │  N.O. │                                      │
      └───┬───┘                                      │
          │                                          │
       [ Pin 3 ] ────────────────────────────────────┴─── ( - )


DATA SHEET